1) 100 m. Tons tinfree steel sheets rectangular and scroll 0.20 to 0.30mm (mostly 0.29-0.30mm about 85% scroll). Secondary

2) 100 m. Tons tinfree steel pup coils conventional and dr tempers 0.15 to 0.38mm. Secondary

3) 2000 m tons electro-galvanized (two sides electro-zinc coated) secondary coils due to coating line skips (uncoated spots) soft commercial tempers, mostly drawing quality, thickness 0.635mm xto 1.12mm; widths 609mm to 1829mm (mostly 914mm & wider coil weights 2.2 m. Ton up to 20 m. Ton, noting coils may be split into smaller shipping units if required

4) 40m. Ton electrolytic tinplate reel 2 coils t1 thru t5 brite, tin coating .20 and better 0.31 to 0.38mm x 711mm & wider- secondary

5) - 30 m. Ton tinfree steel secondary master coils temper t4-t5 0.31mm x 787mm x coil

6) 100 m ton 2cretp original mill wrapped master secondary coils all 3 m.t. and larger 0.18 to 0.28mm x 762mm & wider

7) 40 m. Ton nickel plated steel coils, natural nickel finish (more or less brite) soft commercial tempers, 0.20 to 0.30mm x 76 to 702mm - secondary

8) 260 m. Ton prime excess hot dipped galvanized coils, soft commercial tempers, thickness 0.18mm to 0.30mm ; widths 609mm thru 1060mm coil weights 2 m.t. up to 9 m.t.

9) 100 m. Ton tinfree steel secondary master coils, original mill wrapped, coil weight 3 m.t. and heavier, thickness 0.15 to 0.30mm x 762mm and wider

10) 20 m. Ton stainless steel secondary coil stocklot, aisi 430-434-436thickness 0.49mm up to 4.6mm x 715mm to 1245mm

11) 65 m. Ton electrolytic tinplate secondary master coils, soft temper t3, tin coatings .20 and .50, brite finish size: 0.1529mm x 755mm to 816mm

12) 100 m.ton blackplate and cold rolled secondary coils tempers t1 (soft) thru full hard thickness 0.15mm to 0.45mm x 508mm & wider all offerings are usa origin unless otherwise specified.